An online submission and tracking service via Internet facilitates a speedy and cost-effective submission of manuscripts. The full manuscript has to be submitted online via Bentham's Content Management System (CMS) at bsp-cms.eurekaselect.com / View Submission Instructions
Manuscripts must be submitted by one of the authors of the manuscript, and should not be submitted by anyone on their behalf. The principal/corresponding author will be required to submit a Copyright Letter along with the manuscript, on behalf of all the co-authors (if any). The author(s) will confirm that the manuscript (or any part of it) has not been published previously or is not under consideration for publication elsewhere. Furthermore, any illustration, structure or table that has been published elsewhere must be reported, and copyright permission for reproduction must be obtained.
For all online submissions, please provide soft copies of all the materials (main text in MS Word or Tex/LaTeX), figures / illustrations in TIFF, PDF or JPEG, and chemical structures drawn in ChemDraw (CDX) / ISISDraw (TGF) as separate files, while a PDF version of the entire manuscript must also be included, embedded with all the figures / illustrations / tables / chemical structures etc. It is advisable that the document files related to a manuscript submission should always have the name of the corresponding author as part of the file name, i.e., Cilli MS text.doc”, “Cilli MS Figure 1 etc.
It is imperative that before submission, authors should carefully proofread the files for special characters, mathematical symbols, Greek letters, equations, tables, references and images, to ensure that they appear in proper format.
References, figures, tables, structures etc. should be referred to in the text at the place where they have been first discussed. Figures legends/captions should also be provided.
A successful electronic submission of a manuscript will be followed by a system-generated acknowledgement to the principal/corresponding author. Any queries therein should be addressed to email@example.com
The editorial policies of Bentham Science Publishers on publication ethics, peer-review, plagiarism, copyrights/ licenses, errata/corrections, and article retraction/ withdrawal can be viewed at Editorial Policy
It is mandatory that a signed copyright letter also be submitted along with the manuscript by the author to whom correspondence is to be addressed, delineating the scope of the submitted article, declaring potential competing interests, acknowledging contributions from authors and funding agencies, and certifying that the paper is prepared according to the 'Instructions for Authors'. All inconsistencies in the text and in the reference section and any typographical errors must be carefully checked and corrected before the submission of the manuscript. The article should not contain any such material or information that may be unlawful, defamatory, fabricated, plagiarized, or which would, if published, in any way whatsoever, violate the terms and conditions as laid down in the copyright agreement. The authors acknowledge that the publishers have the legal right to take appropriate action against the authors for any such violation of the terms and conditions as laid down in the copyright agreement. Download the Copyright letter
The journal publishes peer-reviewed original letters, research articles and mini- and full-length review articles written in English. Single topic/thematic issues may also be considered for publication.
As a service to authors publishing in Current Enzyme Inhibition, all articles will be published as open access via the journal's website until the end of 2015.
These special issues are peer-reviewed and may contain invited or uninvited review/mini-review articles. A Single Topic Issue Editor will offer a short perspective and co-ordinate the solicitation of manuscripts between 3-5 (for a mini-thematic Issue) to 6-10 (for full-length thematic Issue) from leading scientists. Authors interested in editing a single topic issue in an emerging field of enzyme inhibition may submit their proposal to the Editor-in-Chief at firstname.lastname@example.org for consideration.
For proposals to publish conference proceedings in this journal, please contact us at email: email@example.com.
Full-length reviews should be 8000-40000 words excluding figures, structures, photographs, schemes, tables, etc.
Mini-reviews should be 3000-6000 words excluding figures, structures, photographs, schemes, tables, etc.
Systematic Reviews includes systematic updates in review protocols, methods, research, and results from all fields of health for any studies and updates on already published issues.
Research articles should be 4000-8000 words excluding figures, structures, photographs, schemes, tables, etc.
Letters should be 3000-6000 words excluding figures, structures, photographs, schemes, tables etc.
There is no restriction on the number of figures, tables or additional files e.g. video clips, animation and datasets, that can be included with each article online. Authors should include all relevant supporting data with each article (Refer to Supplementary Material section).
The manuscript should be written in English in a clear, direct and active style. All pages must be numbered sequentially, facilitating in the reviewing and editing of the manuscript.
It is advisable that authors prepare their manuscript using the template available on the Web, which will assist in preparation of the manuscript according to Journal’s Format. Download the Template.
Our contracted service provider Eureka Science can, if needed, provide professional assistance to authors for the improvement of English language and figures in manuscripts.
Manuscripts submitted for research and review articles in the respective journal should be divided into the following sections:
The title of the article should be precise and brief and must not be more than 120 characters. Authors should avoid the use of non-standard abbreviations. The title must be written in title case except for articles, conjunctions and prepositions.
Authors should also provide a ‘running title’. Title, running title, byline, correspondent footnote and key words should be written as presented in the original manuscript.
Title page should include paper title, author(s) full name and affiliation, corresponding author(s) names and complete affiliation/address, along with phone, fax and email.
The abstract of an article should be its clear, concise and accurate summary, having no more than 250 words, and including the explicit sub-headings (as in-line or run-in headings in bold). Use of abbreviations should be avoided and the references should not be cited in the abstract. Ideally, each abstract should include the following sub-headings, but these may vary according to requirements of the article.
A graphic must be included with each manuscript for use in the Table of Contents (TOC). This must be submitted separately as an electronic file (preferred file types are EPS, PDF, TIFF, Microsoft Word, PowerPoint and CDX, etc.). A graphical abstract, not exceeding 30 words along with the illustration, helps to summarize the contents of the manuscript in a concise pictorial form. It is meant as an aid for the rapid viewing of the journals' contents and to help capture the readers’ attention. The graphical abstract may feature a key structure, reaction, equation, etc. that the manuscript elucidates upon. It will be listed along with the manuscript title, authors’ names and affiliations in the contents page, typeset within an area of 5 cm by 17 cm, but it will not appear in the article PDF file or in print.
6 to 8 keywords must be provided in alphabetical order.
The main text should begin on a separate page and should be divided into title page, abstract and the main text. The text may be subdivided further according to the areas to be discussed, which should be followed by the Acknowledgements, List of Abbreviations, Conflict of Interest and Reference sections.
For Research Articles, the manuscript should begin with the title page and abstract followed by the main text, which must be structured into separate sections as Introduction, Materials and Methods, Results, Discussion, Conclusion, Acknowledgements and References.
For Reviews, the manuscript should be divided into title page, abstract and the main text. The text may be subdivided further according to the areas to be discussed, which should be followed by the Acknowledgement, List of Abbreviations, Conflict of Interest and Reference sections. The Review Article should mention any previous important recent and old reviews in the field and contain a comprehensive discussion starting with the general background of the field. It should then go on to discuss the salient features of recent developments. The authors should avoid presenting material which has already been published in a previous review.
The authors are advised to present and discuss their observations in brief. The manuscript style must be uniform throughout the text and 10 pt Times New Roman fonts should be used. The full term for an abbreviation should precede its first appearance in the text unless it is a standard unit of measurement. The reference numbers should be given in square brackets in the text. Italics should be used for Binomial names of organisms (Genus and Species), for emphasis and for unfamiliar words or phrases. Non-assimilated words from Latin or other languages should also be italicized e.g. per se, et al. etc.
Section headings should be numbered sequentially, left aligned and have the first letter capitalized, starting with the introduction. Sub-section headings however, should be in lower-case and italicized with their initials capitalized. They should be numbered as 1.1, 1.2, etc.
The Introduction section should include the background and aims of the research in a comprehensive manner.
This section provides details of the methodology used along with information on any previous efforts with corresponding references. Any details for further modifications and research should be included.
Repeated information should not be reported in the text of an article. A calculation section must include experimental data, facts and practical development from a theoretical perspective.
Results should be precise.
This should explore the significance of the results of the work, and present reproducible procedure. Extensive citations and discussion of published literature should be avoided.
The Results and discussions may be presented individually or combined in a single section with short and informative headings.
A small paragraph summarizing the contents of the article, presenting the final outcome of the research or proposing further study on the subject, may be given at the end of the article under the Conclusion section.
All clinical investigations must be conducted according to the Declaration of Helsinki principles. For all manuscripts reporting data from studies involving human participants, formal review and approval by an appropriate institutional review board or ethics committee is required. For research involving animals, the authors should indicate whether the procedures followed were in accordance with the standards set forth in the eighth edition of Guide for the Care and Use of Laboratory Animals (grants.nih.gov/grants/olaw/guide-for-the-care-and-use-of-laboratory-animals_prepub.pdf; published by the National Academy of Sciences, The National Academies Press, Washington, D.C.).
All experimental research conducted on animals must comply with international guidelines, and should be approved by an appropriate ethics committee. Research in animals must adhere to ethical guidelines of The Basel Declaration and the International Council for Laboratory Animal Science (ICLAS) has also published ethical guidelines.
The manuscript must clearly include a declaration of compliance with relevant guidelines (e.g. the revised Animals (Scientific Procedures) Act 1986 in the UK and Directive 2010/63/EU in Europe) and/or relevant permissions or licences obtained by the IUCN Policy Statement on Research Involving Species at Risk of Extinction and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.
All experimental research on plants (either cultivated or wild), must comply with international guidelines. The manuscript must clearly include a declaration of compliance of field studies with relevant guidelines and/or relevant permissions or licences obtained by the IUCN Policy Statement on Research Involving Species at Risk of Extinction and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.
Bentham Science Publishers supports retrospective registration of systematic reviews, in a suitable registry (such as PROSPERO). The registered systematic review must include the registration number as the last line of the manuscript abstract.
If the manuscript has an individuals’ data, such as personal detail, audio-video material etc., consent should be obtained from that individual. In case of children, consent should be obtained from the parent or the legal guardian.
A specific declaration of such approval and consent-to-disclose form must be made in the copyright letter and in a stand-alone paragraph at the end of the article especially in the case of human studies where inclusion of a statement regarding obtaining the written informed consent from each subject or subject's guardian is a must. The original should be retained by the guarantor or corresponding author. Editors may request to provide the original forms by fax or email.
All such case reports should be followed by a proper consent prior to publishing.
Greek symbols and special characters often undergo formatting changes and get corrupted or lost during preparation of manuscript for publication. To ensure that all special characters used are embedded in the text, these special characters should be inserted as a symbol but should not be a result of any format styling (Symbol font face) otherwise they will be lost during conversion to PDF/XML.
Authors are encouraged to consult reporting guidelines. These guidelines provide a set of recommendations comprising a list of items relevant to their specific research design. Chemical equations, chemical names, mathematical usage, unit of measurements, chemical and physical quantity & units must conform to SI and Chemical Abstracts or IUPAC.
All kinds of measurements should be reported only in International System of Units (SI).
If abbreviations are used in the text either they should be defined in the text where first used, or a list of abbreviations should be provided.
Financial contributions and any potential conflict of interest must be clearly acknowledged under the heading ‘Conflict of Interest’. Authors must list the source(s) of funding for the study. This should be done for each author.
All individuals listed as authors must have contributed substantially to the design, performance, analysis, or reporting of the work and are required to indicate their specific contribution. Anyone (individual/company/institution) who has substantially contributed to the study for important intellectual content, or was involved in drafting or revising the manuscript must also be acknowledged
Guest or honorary authorship based solely on position (e.g. research supervisor, departmental head) is discouraged.
The specific requirements for authorship have been defined by the International Committee of Medical Journal Editors (ICMJE; www.icmje.org). Examples of authors' contributions are: 'designed research/study', 'performed research/study', 'contributed important reagents', 'collected data', 'analyzed data', 'wrote paper' etc. This information must be included in the submitted manuscript as a separate paragraph under the heading ‘Acknowledgements’. The corresponding author is responsible for obtaining permission from all co-authors for the submission of any version of the manuscript and for any changes in the authorship.
References must be listed in the ACS Style only. All references should be numbered sequentially [in square brackets] in the text and listed in the same numerical order in the reference section. The reference numbers must be finalized and the bibliography must be fully formatted before submission.
See below few examples of references listed in the ACS Style:
Some important points to remember:
In case there is a need to present lengthy, but essential methodological details, use appendices, which can be a part of the article. An appendix must not exceed three pages (Times New Roman, 10 point fonts, 900 max. words per page).The information should be provided in a condensed form, ruling out the need of full sentences. A single appendix should be titled APPENDIX, while more than one can be titled APPENDIX A, APPENDIX B, and so on.
All authors must strictly follow the guidelines below for preparing illustrations for publication in Current Enzyme Inhibition. If the figures are found to be sub-standard, then the manuscripts will be rejected and the authors offered the option of figure improvement professionally by Eureka Science. The costs for such improvement will be charged to the authors.
Illustrations should be embedded in the text file, and must be numbered consecutively in the order of their appearance. Each figure should include only a single illustration which should be cropped to minimize the amount of space occupied by the illustration.
If a figure is in separate parts, all parts of the figure must be provided in a single composite illustration file.
Photographs should be provided with a scale bar if appropriate, as well as high-resolution component files.
Line Art image type is normally an image based on lines and text. It does not contain tonal or shaded areas. The preferred file format should be TIFF or EPS, with the color mode being Monochrome 1-bit or RGB, in a resolution of 900-1200 dpi.
Halftone image type is a continuous tone photograph containing no text. It should have the preferred file format TIFF, with color mode being RGB or Grayscale, in a resolution of 300 dpi.
Combination image type is an image containing halftone , text or line art elements. It should have the preferred file format TIFF, with color mode being RGB or Grayscale, in a resolution of 500-900 dpi.
For illustrations, the following file formats are acceptable:
Bentham Science does not process figures submitted in GIF format.
For TIFF or EPS figures with considerably large file size restricting the file size in online submissions is advisable. Authors may therefore convert to JPEG format before submission as this results in significantly reduced file size and upload time, while retaining acceptable quality. JPEG is a ‘lossy’ format. However, in order to maintain acceptable image quality, it is recommended that JPEG files are saved at High or Maximum quality.
Zipit or Stuffit tools should not be used to compress files prior to submission as the resulting compression through these tools is always negligible.
Please refrain from supplying:
There are many software packages, many of them freeware or shareware, capable of converting to and from different graphics formats, including PNG.
General tools for image conversion include Graphic Converter on the Macintosh, Paint Shop Pro, for Windows, and ImageMagick, available on Macintosh, Windows and UNIX platforms.
Bitmap images (e.g. screenshots) should not be converted to EPS as they result in a much larger file size than the equivalent JPEG, TIFF, PNG or BMP, and poor quality. EPS should olity. EPS should only be used for images produced by vector-drawing applications such as Adobe Illustrator or CorelDraw. Most vector-drawing applications can be saved in, or exported as, EPS format. In case the images have been originally prepared in an Office application, such as Word or PowerPoint, then the original Office files should be directly uploaded to the site, instead of being converted to JPEG or another format that may be of low quality.
Note for authors: To maintain publication quality, figures submitted in colour will be published in colour only.
Chemical structures must be prepared in ChemDraw/CDX and provided as separate file.
[As according to the ACS style sheet]
|Bond spacing||18% of width|
|Fixed length||14.4 pt (0.500cm, 0.2in)|
|Bold width||2.0 pt (0.071cm, 0.0278in)|
|Line width||0.6 pt (0.021cm, 0.0084in)|
|Margin width||1.6 pt (0.096cm)|
|Hash spacing||2.5 pt (0.088cm, 0.0347in)|
|Font||Times New Roman|
|Under the Preference Choose:|
|Under Page Setup Use:|
We do encourage to append supportive material, for example a PowerPoint file containing information about the study, a PowerPoint file containing additional screenshots, a Word, RTF, or PDF document showing the original instrument(s) used, a video, or the original data (SAS/SPSS files, Excel files, Access Db files etc.) provided it is inevitable or endorsed by the journal's Editor.
Supportive/Supplementary material intended for publication must be numbered and referred to in the manuscript but should not be a part of the submitted paper. In-text citations as well as a section with the heading "Supportive/Supplementary Material" before the "References" section should be provided. All Supportive/Supplementary Material must be listed and a brief caption line for each file describing its contents should be included.
Any additional files will be linked into the final published article in the form supplied by the author, but will not be displayed within the paper. They will be made available in exactly the same form as originally provided only on our Web site. Please also make sure that each additional file is a single table, figure or movie (please do not upload linked worksheets or PDF files larger than one sheet). Supportive/ Supplementary material must be provided in a single zipped file not larger than 4 MB.
Authors must clearly indicate if these files are not for publication but meant for the reviewers'/editors' perusal only.
Bentham Science has collaborated with the Copyright Clearance Center to meet customer’s licensing, besides rights & permission needs.
The Copyright Clearance Center’s RightsLink® service makes it faster and easier to secure permission from Bentham Science journal titles. Simply visit Journals by Title and locate the desired content. Then go to the article’s abstract and click on “Rights and Permissions” to open the RightsLink’s page. If you are unable to locate the content you wish to use or you are unable to secure the rights you are seeking, please e-mail us at firstname.lastname@example.org
Published/reproduced material should not be included unless written permission has been obtained from the copyright holder, which should be forwarded to the Editorial Office in case of acceptance of the article for publication.
The names of the authors should be provided according to the previous citations or as the authors would want them to be published along with the institutional affiliations, current address, telephone, cell & fax numbers and the email address. Email address must be provided with an asterisk in front of the name of the principal author. The corresponding author(s) should be designated and their complete address, business telephone and fax numbers and e-mail address must be stated to receive correspondence and galley proofs.
No page charges will be levied to authors for the publication of their article.
Manuscripts submitted containing language inconsistencies will not be published. Authors must seek professional assistance for correction of grammatical, scientific and typographical errors. Professional team available at Eureka Science may assist you in the English language editing of your article. Please contact Eureka Science for a language editing quote at e-mail: email@example.com stating the total number of words of the article to be edited.
영문 오타가 많은 원고는 출판되지 않을 것입니다. 영문 오타를 없애겠다는 조건으로 받은 원고는 영어 편집 전문회사인 유럽 공동 기술개발 기구로부터 가격 견적서가 보내 질 것입니다. 영어 작문에 어려움이 있는 비영어권 국가의 저자들은 원고를 학술지에 제출하기 전에 영어 편집회사와 접촉할 것을 권합니다. 영어 편집 견적서를 받기 위해서 교정될 원고의 단어수를 적은 메일을 유럽 공동 기술개발 기구 메일인 firstname.lastname@example.org 로 보내시기 바랍니다.
Les manuscrits soumis avec plusieurs erreurs typographiques en Anglais ne seront pas publiés en l’état. Les manuscrits sont acceptés pour publication à la condition que l'anglais utilisé soit corrigé après la soumission et seront envoyés pour examen à Eureka Science, une société d'édition de langue professionnelle. Les auteurs en provenance de pays où la langue est différente de l'anglais et qui ont de médiocres compétences en anglais écrit, sont priés de contacter la société d'édition de langue avant de soumettre leur manuscrit à la revue. Merci de contacter Eureka Science à email@example.com pour un devis en indiquant le nombre total de mot de l’article à éditer.
Authors will receive page proofs of their accepted paper before publications. To avoid delays in publication, proofs should be checked immediately for typographical errors and returned within 48 hours. Major changes are not acceptable at the proof stage. In case of inability to send corrections within 48 hours due to some reason, the author(s) must at least send an acknowledgement on receiving the galley proofs otherwise article will be published exactly as received and the publishers will not be responsible for any error occurring in the published manuscript.
The corresponding author will be solely responsible for ensuring that the revised version of the manuscript incorporating all the submitted corrections receives the approval of all the co-authors of the manuscript.
Printed reprints and e-prints may be ordered from the Publisher prior to publication of the article. First named authors may also order a personal print and online subscription of the journal at 50% off the normal subscription rate by contacting the subscription department at e-mail: firstname.lastname@example.org.
Bentham Science also offers authors the choice of “Open Access Plus” publication of articles at a fee of US$ 450 per article. This paid service allows for articles to be disseminated to a much wider audience, on the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0) (https://creativecommons.org/licenses/by/4.0/legalcode). Authors are asked to indicate whether or not they wish to pay to have their article made more widely available on this “Open Access Plus” basis. Where an author does not opt-in to this paid service, then the author’s article will be published only on Bentham Science’s standard subscription-based access, at no additional cost to the author.
For more information please contact us at e-mail: email@example.com
All papers submitted for publication are immediately subjected to editorial scrutiny, usually in consultation with members of the journal Editorial Advisory Board and outside independent reviewers. Every effort will be made to peer review submitted papers quickly. Papers which are delayed by authors in revision for more than 30 days will have to be re-submitted as a new submission. Papers accepted for publication are typeset and proofs are dispatched to authors for any corrections prior to final publicatio
For this journal an optional fast publication fee-based service called QUICK TRACK is available to authors for their submitted manuscripts.
QUICK TRACK allows online publication within 2 weeks of receipt of the final approved galley proofs from the authors. Similarly the manuscript can be published in the next forthcoming PRINT issue of the journal. The total publication time, from date of first receipt of manuscript to its online publication is 12 weeks, subject to its acceptance by the referees and modification (if any) by the authors within one week.
Authors who have availed QUICK TRACK services in a BSP journal will be entitled for an exclusive 30% discount if they again wish to avail the same services in any Bentham journal.
For more information please contact the Editorial Office by e-mail at firstname.lastname@example.org.
Authors who publish in Bentham Science print & online journals will transfer copyright to their work to Bentham Science Publishers. Submission of a manuscript to the respective journals implies that all authors have read and agreed to the content of the Copyright Letter or the Terms and Conditions. It is a condition of publication that manuscripts submitted to this journal have not been published and will not be simultaneously submitted or published elsewhere. Plagiarism is strictly forbidden, and by submitting the article for publication the authors agree that the publishers have the legal right to take appropriate action against the authors, if plagiarism or fabricated information is discovered. By submitting a manuscript the authors agree that the copyright of their article is transferred to the publishers if and when the article is accepted for publication. Once submitted to the journal, the author will not withdraw their manuscript at any stage prior to publication.
By signing the Copyright Letter the authors retain the rights of self-archiving. Following are the important features of self-archiving policy of Bentham Science journals:
Bentham Science Publishers uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. iThenticate software checks content against a database of periodicals, the Internet, and a comprehensive article database. It generates a similarity report, highlighting the percentage overlap between the uploaded article and the published material. Any instance of content overlap is further scrutinized for suspected plagiarism according to the publisher’s Editorial Policies. Bentham Science allows an overall similarity of 20% for a manuscript to be considered for publication. The similarity percentage is further checked keeping the following important points in view:
The text of every submitted manuscript is checked using the Content Tracking mode in iThenticate. The Content Tracking mode ensures that manuscripts with an overall low percentage similarity (but which may have a higher similarity from a single source) are not overlooked. The acceptable limit for similarity of text from a single source is 5%. If the similarity level is above 5%, the manuscript is returned to the author for paraphrasing the text and citing the original source of the copied material.
It is important to mention that the text taken from different sources with an overall low similarity percentage will be considered as a plagiarized content if the majority of the article is a combination of copied material.
There may be some manuscripts with an overall low similarity percentage, but a higher percentage from a single source. A manuscript may have less than 20% overall similarity but there may be 15 % similar text taken from a single article. The similarity index in such cases is higher than the approved limit for a single source. Authors are advised to thoroughly rephrase the similar text and properly cite the original source to avoid plagiarism and copyright violation.
We all know that scholarly manuscripts are written after thorough review of previously published articles. It is therefore not easy to draw a clear boundary between legitimate representation and plagiarism. However, the following important features can assist in identifying different kinds of plagiarized content. These are:
Published manuscripts which are found to contain plagiarized text are retracted from the journal website after careful investigation and approval by the Editor-in-Chief of the journal. A ‘Retraction Note’ as well as a link to the original article is published on the electronic version of the plagiarized manuscript and an addendum with retraction notification in the journal concerned.
Bentham Science Publishers are pleased to offer electronic publication of accepted papers prior to scheduled publication. These peer-reviewed papers can be cited using the date of access and the unique DOI number. Any final changes in manuscripts will be made at the time of print publication and will be reflected in the final electronic version of the issue. Articles ahead of schedule may be ordered by pay-per-view at the relevant links by each article stated via the E-Pub Ahead of Schedule
Articles appearing in E-Pub Ahead-of-Schedule sections have been peer-reviewed and accepted for publication in this journal and posted online before scheduled publication. Articles appearing here may contain statements, opinions, and information that have errors in facts, figures, or interpretation. Accordingly, Bentham Science Publishers, the editors and authors and their respective employees are not responsible or liable for the use of any such inaccurate or misleading data, opinion or information contained of articles in the E-Pub Ahead-of-Schedule.